| |
|
| Anti corrosive Resins |
|
 |
|
Chemifix BIPA |
|
|
|
Chemifix BIPR |
|
|
|
Chemifix CFR |
|
|
|
| Anti corrosive Powders |
|
|
|
Chemifix SSP |
|
|
|
Chemifix KSP |
|
|
|
Chemifix PHP |
|
|
|
Chemifix FP |
|
|
|
Chemifix CNP |
|
|
|
Chemifix SUP |
|
|
|
Chemifix Q10 |
|
|
|
Chemifix CFP |
|
|
| Anti Corrosive Bitumen Mastic |
|
|
|
Chemifix SBM |
|
|
|
Chemifix HDBM |
|
|
|
Chemifix TRBM |
|
|
|
Chemifix SPBM |
|
|
|
Chemifix HFBM |
|
|
|
|
|
|
 |
|
| |
| |
 |
|
(General Purpose Anticorosive ) |
|
|
|
|
Ready-Mix Bituminous Primer |
|
Chemifix PRIMER is a protective coating against corrosive effect of chemicals on concrete surface. CHEMIFIX PRIMER is recommended under layer of bitumen Chemifix mastic for concrete surface. |
|
| Chemifix PRIMER can be applied by brush and dried within 3 to 4 hours at normal temperature. Chemifix PRIMER can be used as primer coat on concrete surface. Before application of layer of mastic for acid resistant brick lining or any mastic job. |
|
|
Application : |
|
 |
|
Concrete surface must be cleaned and found to be free from lubricants, previous coating any acid or other foreign particles. CHEMIFIX PRIMER is applied on concrete confirm as above by brush. It is allowed to dry until essential track free, which is 3 to 4 hours at normal temperature. The drying time is depending upon the temperature, if climate is cold; more than 4 hours will be required. |
|
|
Warning : Chemifix PRIMER is flammable and harmful if swallowed or inhaled. Keep away from heat, spark or open flame. Use gloves and vapor mask when applying. |
| |
|
Drying Time : |
Drying Time : |
| Finish : |
Smooth & uniform ( suitable for application by brush ) |
| Color:: |
Black |
| Flash point: |
30c minimum |
| Shelf life: |
12 months at room Temperature |
| Dry Film Thickness: |
30 to 35 micron/coat |
| Coverage : |
Average 3 to 4 m2 per ltr.per coat |
| Density: |
0.8 gm/c.c |
|
| |
| |
|
|
|
| |
powered
by |
Ultra InfoTech |
powered
© 2000 - 2008 All Right Reserved - Chemisight |
|
|
|
